Now a day’s network is important one since all the data are transmitted over network and everything will be carries out by the communication over the network. So that network is important of this technological world and requirement for the network administrators in the market also slightly increasing every day. There are so many institutions providing basics of this network courses for the student simply by getting the huge amount of money. Following are some simple guidance in which any one can get some basic idea about network and network connection using ethernet cable. Ethernet cable is nothing but a wire used for network connection and it is used in all types of networks such as telephone for voice transmission, PC’s for data and video transmission and so on. Ethernet cable is a lengthy cable which holds eight thin wires which are different colors. These colors are blue, brown, green, orange, blue / white, brown / white, orange / white, green /while. Based on these colors a network has been created as color pattern matching is important of this. These eight wires must be created as four pair of cable as following matches blue & blue / white is one pair, brown & brown / white, green & green / white, orange & orange / white. These four kinds of twisted pair must be created and both the ends are inserted into a jack. Jack is nothing but a small device which holds eight pins connected into port of network device or a system. Finally this jack should be connect with the system and network device such as modem or switch hence manual network connection is created then have to configure the system based on IP address as internet protocol which is unique identification address of each system. Above are the very basics of network connection any one can try this to create a simple network connection using the Ethernet cable